Connecting the world to reliable power
Mounting interface
Double-bearing alternators
Bracket-mounted units on their own bearings, driven by belt or coupling, clear of the engine housing.
Who buys this
Industrial power equipment builders, project integrators, and genset makers who separate the alternator from the prime mover.
How the machine is mounted
The alternator stands on its own frame and carries the full drive load, which allows it to be coupled to a prime mover that is not a standard automotive-style engine.

What to confirm before we quote
- The prime mover's rating and its overspeed characteristics, since a belt drive leaves the machine exposed to a runaway.
- The shaft dimensions and the keyway, which have to match the coupling being used.
- The alignment method between the alternator and the prime mover, and the allowance for thermal movement.
- The belt tension and the frequency it imposes on the bearings, which affects the bearing arrangement.
- The frequency and the speed it has to be driven at, since the machine is built for that operating point.
How the two differ
Everything else on this page is the same. These three points are where the choice actually changes the machine.
How it mounts
The machine stands on a bracket or a baseplate and carries the whole drive load itself. That is the reason it is chosen when the prime mover is not a standard engine.
What changes the build
The shaft and coupling arrangement, the bearing type, the overspeed provision and the cooling path are decided here rather than by the housing flange.
Where it is used
Industrial equipment, permanent installations, and projects where the prime mover is separated from the generator for access or for the site's own reasons.
Price
What affects your quote
The quotation is built from the six conditions below. We do not publish a price, because a published number would be wrong for most enquiries.
- Power and frequencyMachine rating in kVA and load in kW confirmed separately, at 50 Hz or 60 Hz.
- Voltage and winding optionStandard winding or a special voltage, and how many different voltages the set has to carry.
- Mounting and mechanical interfaceSingle-bearing SAE or double-bearing, and how it mates to your engine and its housing.
- Excitation and short-circuit supportWhether your application needs stronger short-circuit support than the standard arrangement.
- Quantity and delivery batchUnits per order, and how many batches you want us to schedule.
- Delivery point and trade termsDestination port, and how shipping, insurance and clearance are split between us. EXW, FOB, CIF and DDP can all be quoted.
Request technical documentation
Send your requirements - a written reply within 24 hours, a selection scheme within 48.
Typical lead time and indicative budget will be confirmed in the formal quotation.