Connecting the world to reliable power
Mounting interfaces
Mounting: single-bearing or double-bearing
How the alternator is attached to the engine decides the flange, the bearings, the shaft and the way the machine is aligned. It is also the one interface decision that cannot be changed later, so it is confirmed before anything else is written down.
Two ways to mount the machine
Both arrangements come from the same production base. What differs is where the machine sits, who carries the drive load and how the machine is aligned to the prime mover.
Single-bearing alternators
The unit bolts to the flywheel housing and takes the alignment load with it. It is the usual genset arrangement: the set becomes one rigid machine, and the flange dimensions are fixed by the engine rather than chosen.
Double-bearing alternators
The unit stands on its own bracket and carries the whole drive load itself, driven by belt or coupling. It is chosen when the prime mover is not a standard engine, or when the machine has to be separated from the set for any reason.
What the interface decides
Four things on the requirement sheet are fixed by the mounting arrangement rather than by the power rating.
- The mechanical interface itself: the engine housing flange and pilot diameter for a single-bearing machine, the shaft and coupling for a double-bearing machine.
- Who carries the load. A single-bearing machine is carried by the engine housing; a double-bearing machine carries the drive load itself.
- How the machine is aligned, and how much allowance is left for thermal movement between the alternator and the prime mover.
- What else has to be confirmed with it: rotation direction, the pole count the engine speed needs for the destination frequency, and the cooling path around the machine.