Synchronous AC alternators 100 - 250 kVA

The band where most orders are placed, where the machine is big enough for the electrical scheme to start deciding things.

100 - 250 kVA · 50 Hz / 60 Hz · 4 pole · Shunt/PMG

Single-bearing on an SAE flange, or double-bearing on a coupling. The two mounting arrangements

What this band covers

Small-to-medium band, 100 - 250 kVA
Small-to-medium - 100 - 250 kVA
IndicatorParameter
Power range100 - 250 kVA
Frequency50 Hz / 60 Hz
Rated voltage50 Hz: 400/230 V, 415/240 V, 380/220 V, 220/115 V, 230 V, 115 V
60 Hz: 480/277 V, 440 V/254 V, 240 V/139 V, 208/120 V, 690/400 V, 240 V, 120 V
Pole count4 pole
Excitation systemShunt/PMG
AVRShunt standard: AS540, SX460* and similar; PMG standard: MX341*, MX341B*; optional: digital AVR
PhasesThree phase
ConnectionStar (Y) or Delta (D)
Insulation classClass H
Protection ratingIP23 standard, IP44 or IP54 optional

Who buys, and what to confirm before you order

Who buys

Genset manufacturers and assemblers, importers and distributors, and project contractors who standardise on this size.

What the machines are used for

General purpose gensets, site power for buildings and small plants, and the standby machines that carry a real load for hours.

What you need to confirm before you order

  • The rated output in kVA and the running load in kW, confirmed separately, and how much of the load is electronic.
  • The engine speed the alternator must run at, and the frequency it has to hold (50 Hz or 60 Hz).
  • The mounting style, and whether the engine carries the machine or it runs on its own bearings.
  • Whether more than one machine works on the same board, and how the protection has to coordinate.
  • The ambient temperature, the altitude, and the hours the machine is expected to run per day.

Where the configuration differs

Winding and voltage

The common three phase arrangements cover most markets, with single phase and special voltages available where a project asks for them. We confirm which one your electrical drawing expects before we order.

Excitation

Shunt excitation carries a single set on its own board. Where machines run in parallel or the protection has to discriminate between circuits, the excitation arrangement is part of the requirement rather than a default.

Enclosure

Open frame, canopy and container each move the air differently. The enclosure decides how the alternator is cooled and how much space is left for ducting and connections.

What affects your quote

  1. Power and frequencyMachine rating in kVA and load in kW confirmed separately, at 50 Hz or 60 Hz.
  2. Voltage and winding optionStandard winding or a special voltage, and how many different voltages the set has to carry.
  3. Mounting and mechanical interfaceSingle-bearing SAE or double-bearing, and how it mates to your engine and its housing.
  4. Excitation and short-circuit supportWhether your application needs stronger short-circuit support than the standard arrangement.
  5. Quantity and delivery batchUnits per order, and how many batches you want us to schedule.
  6. Delivery point and trade termsDestination port, and how shipping, insurance and clearance are split between us. EXW, FOB, CIF and DDP can all be quoted.

Send your requirements - a written reply within 24 hours, a selection scheme within 48.

Typical lead time and indicative budget will be confirmed in the formal quotation.

Where to go next

Mounting: single-bearing or double-bearing

The arrangement decides the flange, the bearings and the alignment. It is the one decision that cannot be changed later.

Eight application scenarios

From data centres to marine sets: the load and the conditions that decide the build in each of them.

kVA vs kW: why we ask for both

The two numbers look interchangeable and are not. The difference is what a quotation is built on.

How we inspect and ship

What is checked before the machine leaves, which documents travel with it and how the loading is planned.

Chat on WhatsApp Business

Ask us

Answers come from published selection notes, not from a catalogue.

Request a quotation

We reply to every enquiry within 24 hours, and a selection scheme follows within 48.