Connecting the world to reliable power

Duty conditions

Regional duty conditions: what actually changes

The machine is the same in every market. What changes is what it has to survive: heat, humidity, dust, a weak grid, or a grid that is strict about what a generator puts back into it. Here is what to confirm in each region, and why it changes the answer.

One range, four sets of conditions

Most of our enquiries arrive with a destination attached, and the destination is often the most useful thing in the whole message. It decides the frequency, and with it the voltage arrangement and the pole count. It also decides the environment the machine has to work in, and that is the part which changes the machine rather than the paperwork.

None of what follows is about the machine being better or worse in one market. It is about which conditions have to be confirmed before the right machine can be chosen, and which of them people most often leave out.

The four regions

Each one is quoted from its own conditions.

01

Southeast Asia: heat and humidity

High ambient temperature combined with high humidity raises the bar on insulation and on moisture protection. The machine is specified for the worst combination it will actually meet, not for the average of the year, and the enclosure and the ventilation path are designed around the site rather than around the standard drawing.

Confirm before quoting

  • The highest ambient temperature the site actually reaches, and for how long.
  • Whether the machine sits indoors, under a canopy, or in an open housing.
  • The humidity and whether condensation is a factor overnight.
02

Middle East: dust and heat

Sand-laden air and high ambient temperature make the cooling arrangement and the protection against ingress the two decisions that shape the build. A machine that is fine on paper will overheat if the cooling path was not designed for the site, and it will be damaged if filtered air is not what the enclosure is actually filtering.

Confirm before quoting

  • The design ambient temperature and the dust load in the air.
  • How the enclosure is filtered, and how often the filters are changed.
  • The altitude of the site, which changes the cooling margin again.
03

Africa: machines that run, and keep running

Where the grid is weak or absent, the generator is the prime supply rather than the standby, and it runs for long hours instead of starting once a month. That changes the priorities: durability and the availability of parts matter more than the lowest purchase price, because a machine that waits for a part is not standby, it is an outage.

Confirm before quoting

  • Whether the machine is prime, standby or emergency duty.
  • How many hours a day it is expected to run.
  • Where the spare parts will come from once the machine is in service.
04

Europe: efficiency, harmonics and consistency when machines run together

Where the grid is strong, the questions move to how efficiently the machine converts fuel in the set, how much harmonic content it puts back into the network, and how consistently it behaves when several machines run in parallel. Those are questions about the scheme rather than about the size.

Confirm before quoting

  • The harmonic content of the connected load.
  • How many machines will run in parallel and how they will share the load.
  • The efficiency class the installation is measured against.

What this means for a requirement

Before the power, before the price, tell us where the machine is going and what it will be exposed to. The destination and the environment usually settle more of the specification than the kVA does, and they settle the parts of it that are hardest to change after the machine has been built.

When you send a requirement, include the ambient temperature, the altitude and the dust or humidity exposure if you know them, and whether the machine is prime or standby duty. If you do not know them, say that instead - it tells us to ask, and it is a faster answer than a guess.

Chat on WhatsApp Business

Ask us

Answers come from published selection notes, not from a catalogue.

Request a quotation

We reply to every enquiry within 24 hours, and a selection scheme follows within 48.