Connecting the world to reliable power

Specialist applications

Specialist power: four needs that are not grid machines

Most of what we supply is an alternator that turns a rotating engine into electricity at the frequency and voltage of the grid it serves. Four needs sit outside that. They are not better machines, they are different machines, and each one starts with a different set of conditions from the buyer. We list them here so you can find out early whether your project belongs to one of them.

Why these are separate

Each of these starts from a different question than the usual one. A grid machine is asked to match a frequency and a voltage that already exist. These are asked to produce something the network does not give, or to serve a load that does not sit on a network at all. That is why they are not ordered from a list and why we confirm the conditions case by case.

If one of these is what you are looking for, the useful next step is a short conversation rather than a quote. Tell us what the machine has to do and we will tell you what has to be settled before it can be priced.

Alternator prepared for loading into a container
Alternator prepared for loading
Placeholder - to be replaced with our own photography

The four

Each one is quoted from the conditions it has to meet, not from a catalogue line.

dc output

Direct current output

A machine that delivers direct current rather than alternating current, for sites that run on a low voltage direct current supply.

The obvious customers are the ones that already run a direct current network: telecom base stations, construction site welfare power, and buildings with direct current lighting. A machine that converts to alternating current and then back again is wasteful when the load downstream is direct current in the first place.

The conditions to confirm are different enough that we do not quote this from a catalogue line. The output voltage has to match the system, the ripple has to sit inside what the downstream equipment tolerates, and the load profile decides the size.

What we need from you

  • The direct current voltage the system runs on.
  • What the downstream equipment tolerates as ripple.
  • Whether the output is a single unit or several working together.
  • Whether the machine replaces something in service, in which case the interface has to match.
lighting tower

Lighting towers

A compact single phase machine for the tower that lights a construction site, a quarry or a port.

A lighting tower is a mobile installation, so the machine is chosen for how it is carried and how it is kept, not only for the output. Size and weight decide whether it can go on the trailer and whether it can be handled by one person.

The lighting itself is a separate matter from the machine. Our job is the alternator that supplies it, and the conditions that follow from how the tower is used: how long it runs, how often it moves, and what it is connected to.

What we need from you

  • The output the lighting load needs, and whether it is single phase.
  • The weight and size that have to be carried on the trailer.
  • How the tower is used: continuous, or intermittent between jobs.
  • The site conditions it works in.
medium frequency

Medium frequency

A machine that delivers a frequency well above the grid frequency, for equipment that needs it.

The frequency is the whole point of these machines, and it is a different exercise from a grid machine throughout. The prime mover runs at a different speed, the winding and the cooling are designed around it, and the machine is matched to a specific load rather than to a network.

The users are shipboard and ground support equipment that needs a frequency the grid cannot give. Because the load is specific, so is the machine, and we confirm the conditions case by case rather than from a list.

What we need from you

  • The frequency the load needs.
  • The prime mover and the speed it runs at.
  • What the machine is driving, and how it is started.
  • The environment it works in, which sets the cooling arrangement.
high voltage

High voltage

A machine that delivers the voltage the network wants, without a step-up transformer in between.

Where the load is close to the distribution network, generating at the network voltage removes a piece of plant from the project. That is the reason to look at this kind of machine at all, and the reason it is worth confirming early whether the saving is real for the project.

The machine is built to a project rather than to a catalogue. Insulation, excitation, protection and the coupling to the prime mover all follow from the network it feeds, so there is nothing useful to fix in advance.

What we need from you

  • The network voltage and frequency at the point of connection.
  • Whether the machine runs in parallel with the network, or stands alone.
  • The prime mover and how it is coupled.
  • The protection and synchronising arrangement the project requires.

Price

What affects your quote

The quotation is built from the six conditions below. We do not publish a price, because a published number would be wrong for most enquiries.

  1. Power and frequencyMachine rating in kVA and load in kW confirmed separately, at 50 Hz or 60 Hz.
  2. Voltage and winding optionStandard winding or a special voltage, and how many different voltages the set has to carry.
  3. Mounting and mechanical interfaceSingle-bearing SAE or double-bearing, and how it mates to your engine and its housing.
  4. Excitation and short-circuit supportWhether your application needs stronger short-circuit support than the standard arrangement.
  5. Quantity and delivery batchUnits per order, and how many batches you want us to schedule.
  6. Delivery point and trade termsDestination port, and how shipping, insurance and clearance are split between us. EXW, FOB, CIF and DDP can all be quoted.

Send your requirements - a written reply within 24 hours, a selection scheme within 48.

Typical lead time and indicative budget will be confirmed in the formal quotation.

Chat on WhatsApp Business

Ask us

Answers come from published selection notes, not from a catalogue.

Request a quotation

We reply to every enquiry within 24 hours, and a selection scheme follows within 48.