Unbalanced load

A building full of single-phase loads puts the three phases out of balance. The machine has to hold the output steady while it happens.

How the machine is configured against this condition

Single-phase heavy loads
Unbalanced load
English nameUnbalanced Three-Phase Load
Core problemWhen a large number of single-phase loads run together, the three phase currents fall out of balance, the neutral point voltage drifts and one phase sits at the wrong voltage. Equipment overheats, protection trips for no reason, and the connected equipment is damaged.
SolutionThe stator winding is optimised specifically for unbalanced loading, which suppresses the voltage shift caused by negative-sequence current and steadies each phase, so the machine can carry single-phase, non-linear and unbalanced loads over a long run.
Typical applicationsCommercial buildings, telecom base stations, small processing plants, domestic loads on ships, and camp sites where lighting and air conditioning run together.
Selection points
  • The capacity is checked against the largest single-phase load.
  • The winding is optimised for unbalanced loading.
  • Three-phase monitoring and alarming, so a persistent imbalance is found on site.

Where to go next

Shunt, PMG and how the field is built

A fast regulator keeps the phases together when the load shifts.

Buildings full of single-phase loads

The largest single-phase load sets the check.

For the cells in the cabinet

Small single-phase loads, close together.

Choose the power band

Single-phase loads push the band up.

Chat on WhatsApp Business

Ask us

Answers come from published selection notes, not from a catalogue.

Request a quotation

We reply to every enquiry within 24 hours, and a selection scheme follows within 48.