VFD loads and harmonics

A drive, a rectifier or an inverter loads the machine with harmonics it was not designed for. The heat they cause is real, and it shortens the insulation.

How the machine is configured against this condition

Production lines, UPS rooms
VFD loads and harmonics
English nameVFD Load and Harmonic Suppression
Core problemVariable frequency drives, UPS units and rectifier loads produce a lot of harmonic content, which heats the machine beyond what the load itself needs, ages the insulation faster and interferes with control systems and communications.
SolutionThe winding is designed against harmonics, which suppresses harmonic amplification and the extra temperature rise, and raises the machine's tolerance of non-linear loads, so the power quality and the life of the equipment both hold.
Typical applicationsVariable speed production lines, variable speed fans and pumps, UPS rooms, charging stations and automated lines with servo systems.
Selection points
  • A harmonic-resistant winding with de-magnetising margin.
  • The share of non-linear load is calculated and margin is left for it.
  • Where the harmonics are severe, active filtering or an isolation transformer is added.
  • The share of non-linear load stated in the requirement.

Where to go next

Shunt, PMG and how the field is built

The excitation and the winding together decide the heating.

Industrial plants

Variable speed lines and servo systems.

When more than one machine shares a bus

Harmonic load plus shared load: two things to write down.

Bands by kVA

Harmonic duty is set by the band and the load.

Chat on WhatsApp Business

Ask us

Answers come from published selection notes, not from a catalogue.

Request a quotation

We reply to every enquiry within 24 hours, and a selection scheme follows within 48.